(6) Surface To Surface Pipe Line Pipe Roller Cone Rollers HEAVY DUTY Lot of 6

Description

(6) Surface To Surface Pipe Line Pipe Roller Cone Rollers HEAVY DUTY Lot of 6
BELOW IS FOR REFERENCE ONLY:
The PR-36-S was developed for the contractor who uses a wide range of pipe sizes and varying job conditions. The large flat bottom base makes the unit very stable when used with large diameter pipe ranging from 0 to 36 inches. The low profile allows the roller to be used on the ground or raised up on cribbing to a desired ground clearance. The unit does not need to be reconfigured or adjusted (1 roller, 2 bearings) to handle different sizes of pipe. The units can be relocated on the site by simply turning over onto the roller and rolled to the next spot. The units can be stacked atop each other for space saving storage. These rollers are very rugged and versatile and can be used for many different applications on the job.
Features and Benefits of the PR-36-S Pipe Roller The PR-36-S was developed for the contractor who uses a wide range of pipe sizes and varying job conditions. The large flat bottom base makes the unit very stable when used with large diameter pipe. The low profile allows the roller to be used on the ground or raised up on cribbing to a desired ground clearance. The unit does not need to be reconfigured or adjusted (1 roller, 2 bearings) to handle different sizes of pipe. The units can be relocated on the site by simply turning over onto the roller and rolled to the next spot. The units can be stacked atop each other for space saving storage. These rollers are very rugged and versatile and can be used for many different applications on the job.
Specifications Pipe Roller PR-36-S Benefits Dimensions 26 1/2" x 28 1/2” x 15 1/2” H Large stable base with low profile 673mm x 724mm x 394mm H and stackable for storage and transport. Weight 147 lbs. (66.7 kg.) Less movement on harder surfaces Load capacity 5000 lbs. (2269.6 kg.) Large capacity for large pipe Pipe range 0-36” O.D. (0-915mm O.D.) No need to adjust or configure Base frame 8” x 11.5 structural channel Reduced bowing, bending or twisting Bearings 2 @ 2” (5600lbs. Static load) Easy rolling and greaseable Main Shaft 2” alloy steel (6000lbs.capacity) Less deflection and weight stress Roller material Solid urethane poured on shaft Resist wear and protects pipe coatings